Showing posts with label New Projects Always Abound. Show all posts
Showing posts with label New Projects Always Abound. Show all posts

Monday, February 13, 2012

RabbitsFoot


Ryan Burch

I made Ryan a Rabbits Foot for going left a couple weeks back so he cruised up and we had a nice little adventure weekend searching out backwards waves for him to test it on. So far I've made about 5 of these little guys, each with a few tweaks on the overall concept of the design. Burch's is the most severe and complex to date; though compared to other finless designs rather understated in my opinion. What I'm after is a clean finless board, with one or two major elements vs. 657 channels running all over the board...so far so very good.



Tuesday, May 17, 2011

A Clearly Winding Path


8' x 22" x X"
v.Bowls

The composition of a surfboard is a pretty special thing to me. The minute details that create the whole feel of the board in the water, in your hands, in your eyes, all of it. It gets me every time, when everything converges.

The most satisfying part for me is not planning too much...let it flow and when all of the elements come together organically, then you have a truly special board. This is unquestionably one of those boards.


Every year around my birthday I take some time to build myself a board to pay a little homage to why and when I started shaping (my 19th birthday)...I turn 25 here in a week or so and this board's evolution has been rattling around and consequently morphing over and over in my brain since late January.

I used to jump at the chance to build a new board for myself but I'm finding a lot of peace and satisfaction in letting something marinate in my head for a while before I even draw on the blank.


The inlayed pages are of a favorite book of mine, Siddartha. It holds a pretty special place in my heart that marks the time where I feel I truly started to find myself and my own path; My early twenties have been anything but a normal experience and I'm appreciating that fact exponentially more every day.

While in australia, a board that mr.Jordan Nobel had in his quiver sparked a little fire in my mind; it was a 7'6 torn out of an older longboard, inspired by Wayne Lynch and the Evolution time-period.
Widepoint back, thin, flat foil, light (extremely.) belly; and thin, down, refined rails. The thing was so much fun, even in the crap waves we got. Trimmy, with a little flick in it's step, it felt more than confidence inspiring with my recently un-casted broken ankle. You could feel it's potential when the wave picked up off the bottom of the ocean and gave you a nice little pocket to work with.


After spending time on Jordan's board and a few other mid-lengths that I shaped pre-australia, I knew the direction I wanted to take this one and began thinking the finer points of it's shape over; the rocker curve, template and foil being that major deviations to what I 'normally' shape. A common theme while this one was on the racks was to shape until I felt uncomfortable and thought it ugly, then go farther.


Instead of writing the extremely-fine details of the board and it's purpose, I first wanted to write about the motivation and reason, and provide the details in a more natural form...The pages of my journal. I guess it's a clear and transparent view into how I build a board and the things I tend to pay attention to while shaping it:



Monday, May 9, 2011

b.Egin





A little ditty from me, to you.

Saturday, April 30, 2011

Taking It Easy


6'6" asym fish for a.Swan...me likey!

Saturday, April 16, 2011

So Very Fond


: Framegrab from a little project that's slowly maturing.

Saturday, February 12, 2011

FS: Edge Spoon

We're selling Jonny's edge spoon to fund a new experiment, she's offered up for $1,000 obo and is in flawless shape, ready to rock your socks...


Located in northern LA; contact me for more info... r.lovelace@pointconceptsurf.com



Monday, February 7, 2011

Welcome [new] Home


Lightner always seems to pop by when I'm setting up new digs...I stumbled upon these from his trip up last week on his righteous blog.

Thursday, February 3, 2011

=12379=



The apple of my eye, and easily the largest physical project I've attempted to tackle yet.

Monday, November 29, 2010

T.rvor feeling Fushy



Trevor and I sat down and devised a new shred sled for his recent and upcoming travels on his Patagonia testing missions.

She's 5'6 x 19" x 2 1/4" and EPS/Epoxy, built for solid waves, steep rivermouths and reefs especially. Its a very compact little fish template with a pulled in nose, very light triplane bottom and an upside down vee leading into the fins and out the tail...Her name is the Fus.h


Already got some very productive testing in, too :)
photos by Kent Keysonte, who's been keepin' it real lately and hanging out a ton!

Thursday, August 12, 2010

Kevlar Progress

Three Stages...
Kevlar layed up, then with 2oz fiberglass over the top:


Then saturated with resin and covered in peel ply to bleed the excess resin into the bleeder cloth (cotton kinda stuff) as the pressure of the bag squeezes the laminate:


and a fuzzy picture of the final laminated deck after the peel ply and bleeder were removed:


Curing overnight...will get to bend it tomorrow!

Wednesday, August 11, 2010

the Stage III

Here we go...time for me to get into some details...

This board has been circling my head now for about two months; but it's a project as a whole that's been a nagging question for me since my first experiments with this type of particular flex about four years ago.

What I'm after is a kind that twists around the center of the board, changing the outline, rocker and projecting out of turns with the same type of motion as a Flex Spoon.  Imagine a rail line lifting from the tail; altering the rocker curve and outline, then when unloaded, springing back to it's normal shape....Awesome.  I know.  

The problem is with a surfboard's thick center, you can't take the same theories that the spoons use (think: a tuning fork shape of stiffness around a flexible center) to achieve the same flex pattern; it's totally backwards and only stiffens the board (think: the greater the distance between two laminates, the stiffer the part will be).

I've been through the parabolic stringer thing and I'm not sold, it's not as flexy as I want...just not enough for me and what I'm thinking of.  This brings me back to where I started.  Here is my new project-in-progress; I've named it Stage III.  



I built a 1/8" thick Paulownia skin that is shaped to use the nose and tail areas of the board to act as a torquing forces around the weaker center.  That was then sucked into the area that I routed out of the deck so it would sit flush:


In the bag ^

After removing it from the bag the board felt way too stiff so I did some brainstorming and took the volume out of the sides of the board, in order to lessen the distance between my final laminate layers.  This will be replaced with EVA foam after glassing:


That got the board much much closer, but it didn't blow me away until I decided to route the center out of the paulownia patch to allow the shape to work as two individual arms instead of one twisting body.  the strength nose-to-tail is 99% unaffected, but allowing MUCH more twist.  That cavity was then filled back in with EPS foam:


This thing threw me for a loop today but with a whole lot of brainstorming it's transformed into something more than I could have thought up.  I've gotten too deep into the 'plan' with some earlier boards, this one i've decided to work as I go and see what I can do on the fly and work as I go with the flex pattern.

Tomorrow I'll be bagging the deck Kevlar and 2oz fiberglass on...I'm so pumped....

Tuesday, August 10, 2010

Adventures in V-Baging


As i mentioned a little bit back, I am underway on my next experimental board; this one involved lots of kevlar, resin-x, 2oz fiberglass, stringerless EPS, paulownia wood, and a vacuum bag...more descriptive posts will follow :)



Thursday, July 29, 2010

Unidirectional Fin

Here's the fin build and final product...bear with me and the explanations:


Layed up god knows how many strands of 24oz roving lengthwise up the fin, horizontal ones are added in the base for strength and tab protection...


Wetted out both sides and then put together under about 50 lbs of weight to squeeze out the excess resin (did not use the vac bag this time, I didn't know how much resin would flow out of the mold in the process and didn't want to risk it yet).


Two hours later I pulled the fin from the mold and this is what where that leaves us before the finish work; its 90% there though...rad!


The fin with the excess cut off and some bubbles filled with resin and sanded flat.


Then the fin got some bondo to fill the rest of the PITA little holes, and some spray paint to cure boredom...yes, the fin is not perfect cosmetically, but I will claim that the flex feels absolutely amazing in hand.  

I will take a short video tomorrow of this fin vs. a volan fin and they way the they flex; in so many words I would describe it as twisty...around :34 and then some in this little clip shows the type of flex I'm going for...the muscles of a tuna fin run lengthwise up and down the fin vertically, so it only makes sense to copy it with fiberglass for a more similar flex pattern:



I'd say this fin flexes with a much more similar shape as compared to a volan or other flat weave fin in the way the the tip bends under and waves like a paddle...very excite!
This whole project was spurred by a mention of Greenough's fin building process with plywood molds; i decided to use fiberglass ones but it's the same idea, and he's a genius. 

Much more experimenting to do, but I'm really pleased with the first version :)

Wednesday, July 28, 2010

Molding Again

I'm working today and tomorrow on a new set of molds so I can mold glasson and box fins out of unidirectional carbon fiber, kevlar, fiberglass, whatever i want really...and with whatever resin I want also (poly, epoxy, resin-x?)...pretty stoked!  


The template I've chosen to make the mold off of will allow me to make anything from spoon fins to hull fins anywhere between 7.5" and 10".


The molds are light; made from two layers of 6oz E glass and then three layers of 3/4oz mat for some girth; I should be pulling the first fin out of it in another day or so!

I've been wanting to do this for a year or so now and found the time to start yesterday between a few customs...As of now the molds are ready to use but I may do a little tweaking to make them a bit cleaner and less prone to damage when in the vacuum bag.

Thursday, July 8, 2010

BalsaSalsa

I previously mentioned a 9'6 chambered balsa wood d.Bowls...


here it is :)


9'6" x 23 x 3 1/8" and weighs in around 35 lbs...outrageous glide potential is held within.



Unchambered (I do the chambering after it's rough shaped) balsa blanks resemble...well...a big block of wood, about 1/4" of rocker nose and tail, and a dead flat deck.  Meaning that fully hand-shaped balsa boards from unchambered blanks are truly special and to me, works of art.  I'm proud to have finished my first...


it IS up for grabs, if you were wondering.



and it got the same stamp that I always put in my boards, but this time hammered in, instead of pushed by thumb.......ha!





Wednesday, February 3, 2010

Albers' Duckula






Kyle Albers: Design.

RLovelAce: Shape.

Potential: Ridonculous

CheckTha: Deck flatness 
and 
Disgruntled small man behind Albers.